What are the partial inspection standards for the rocker switch?
① Appearance of ship switch:
1. The surface of the shape of the boat switch should be clean, without burrs, cracks, scratches or other losses.
2. The metal insert of the ship switch should not be oxidized, corroded, stained and so on.
② Structure size of ship switch:
The shape, structure and installation dimensions of the ship switch should meet the requirements of samples and specifications.
③ Mechanical strength of ship switch
1. The insert shall be able to withstand the insert and pull out of the insert spring terminal, and the insert shall not become loose or fall off.
2. The ship type switch button shall have certain mechanical strength and shall be able to withstand abnormal operation that may occur in normal use.
④ Electrical performance of ship switch
1. When the switch is correctly connected to the circuit, it should be able to meet the control requirements, and can normally control the opening and closing of the circuit, without invalid use.
2. For the boat switch with light, the light on and off should meet the requirements after power, the light on when the switch is opened, the light off when the switch is disconnected, and the opposite situation or the state of steady on and off should not occur.
Only after reaching these inspection standards, the products can achieve high quality, high life, and better achieve good cycle development.
Post time: Jul-14-2022